IDT cung cấp bộ lưu điện APC các dòng online chuyên dùng cho phòng server như: APC Smart-UPS SRT 5000VA 230V; SRT5KRMXLI; SMT1000; SMT3000; SRT10KXLI; SRT10KMRXLI;.... Cần các dịch vụ bộ lưu điện APC từ cung cấp, lắp đặt, bảo hành, bảo trì, bảo dưỡng, thay thế ắc quy,... vui lòng liên hệ IDT

Còn hàng

APC Smart-UPS SRT 5000VA 230V  - SRT5KXLI

IDT chuyên phân phối các dòng UPS APC online cho phòng server như: APC Smart-UPS SRT 5000VA 230V; SRT5KRMXLI; SMT1000; SMT3000; SRT10KXLI; SRT10KMRXLI;....

Bộ lưu điện APC SRT5KXLI, công suất 5.000Va, được thiết kế dạng đứng, chưa bao gồm railkit, thường dùng cho máy tính, wifi, máy ATM, các thiết bị y tế,...

Nếu mình cần lắp tủ rack hay treo thì phải dùng đến railkit hay gọi là giá đỡ, để treo lên, tiết kiện diện tích hoặc chuyển sang dùng bộ lưu điện APC, mã SRT5000RMXLI (mã này UPS và có railkit kèm theo)

Sau đây là thông tin chi tiết về UPS APC SRT5KXLI

Output bộ lưu điện APC SRT5KXLI

  • Output power capacity
    4.5 KWatts / 5.0 kVA
  • Max Configurable Power (Watts)
    4.5 KWatts / 5.0 kVA
  • Nominal Output Voltage
  • Output Voltage Distortion
    Less than 2%
  • Output Frequency (sync to mains)
    50/60Hz +/- 3 Hz
  • Other Output Voltages
    220, 240
  • Load Crest Factor
    3 : 1
  • Topology
    Double Conversion Online
  • Waveform type
    Sine wave
  • Output Connections
    (6) IEC 320 C13 (Battery Backup)
    (2) IEC Jumpers (Battery Backup)
    (4) IEC 320 C19 (Battery Backup)
  • Bypass
    Internal Bypass (Automatic and Manual)


  • Nominal Input Voltage
  • Input frequency
    40 - 70 Hz (auto sensing)
  • Input Connections
    Hard Wire 3 wire (1PH+N+G)
  • Input voltage range for main operations
    160 - 275V
  • Input voltage adjustable range for mains operation
    100 - 275 (half load)V
  • Other Input Voltages
    220, 240

Batteries & Runtime

Communications & Management

  • Interface Port(s)
    RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB
  • Control panel
    Multi-function LCD status and control console
  • Audible Alarm
    Audible and visible alarms prioritized by severity
  • Emergency Power Off (EPO)
  • Available SmartSlot™ Interface Quantity

Surge Protection and Filtering

  • Surge energy rating


  • Maximum Height
    432mm , 43.2CM
  • Maximum Width
    130mm , 13.0CM
  • Maximum Depth
    719mm , 71.94CM
  • Net Weight
  • Shipping weight
  • Shipping Height
    330mm , 33.0CM
  • Shipping Width
    610mm , 61.0CM
  • Shipping Depth
    960mm , 96.0CM
  • Color
  • Units per Pallet


  • Operating Temperature
    0 - 40 °C
  • Operating Relative Humidity
    0 - 95 (non-condensing) %
  • Operating Elevation
  • Storage Temperature
    -15 - 45 °C
  • Storage Relative Humidity
    0 - 95 (non-condensing) %
  • Storage Elevation
  • Audible noise at 1 meter from surface of unit
  • Online thermal dissipation
  • Protection Class
    IP 20

Conformance của bộ lưu điện APC SRT5KXLI

  • Approvals
    CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, RCM, VDE
  • Standard warranty
    3 years repair or replace (excluding battery) and 2 years for battery

Sustainable Offer Status

  • RoHS
    REACH: Contains No SVHCs
  • Proposition 65 Warning
    Available in Documentation tab
  • 10/100 BaseT Connection
    Connect the device to a network using a 10 or 100 BaseT connection
  • Battery failure notification
    Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Green mode
    Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • LCD graphics display
    Text and mimic diagrams that display modes of operation, system parameters and alarms.

Smart-UPS On-Line Features & Benefits

  • Cold-start capable
    Provides temporary battery power when the utility power is out.
  • Generator compatible
    Ensures clean, uninterrupted power to protected equipment when generator power is used.
  • Safety-agency approved
    Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Resettable circuit breaker
    Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
  • Frequency and voltage regulation
    Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Input power factor correction
    Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Power conditioning
    Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • User-replaceable batteries
    Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Disconnected battery notification
    Warns when a battery is not available to provide backup power.
  • Predicitive failure notification
    Provides early-warning fault analysis ensuring proactive component replacement.
  • Audible alarms
    Provides notification of changing utility power and UPS power conditions
  • Automatic self-test
    Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Flash upgradeable firmware
    Install maintenance releases of firmware remotely using FTP.
  • Rack/Tower convertible
    Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
  • Plug-and-Play external batteries
    Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
  • Network manageable
    Provides remote power management of the UPS over the network.
  • Serial connectivity
    Provides management of the UPS via a serial port.
  • LED status indicators
    Quickly understand unit and power status with visual indicators.
  • SmartSlot
    Customize UPS capabilities with management cards.
  • InfraStruXure Manager Compatible
    Enables centralized management via the APC InfraStruXure Manager.



HOTLINE: 086 659 6231 | 0906 05 38 27

Email: info@idtvietnam.net



IDT Việt Nam

Trụ sở Tp. Hồ Chí Minh:

68 Nguyễn Huệ, P. Bến Nghé, Q.1.

6 Phạm Thận Duật, P. Thạnh Mỹ Lợi, Q.2

Chi nhánh Đà Nẵng:

135/1 Huỳnh Thúc Kháng, P.Bình Hiên, Q.Hải Châu

Chi nhánh Hà Nội:

Số 2, ngõ 160/31/3 đường Hoàng Mai, P. Hoàng Văn Thụ, Q.Hoàng Mai, Hà Nội

Bình luận